国产一区二区三区日韩精品,亚洲无码视频福利合集,国产成人AV永久免费观看,亚洲国产va玩弄放荡人妇系列

HomeAbout usNewsProductsCasesEquipmentOrderContact us中文版
Products
YPL series Pressure advection spray Drying machine

Performance:

The whole drying process can be divided into four stages: 
The first stage: the slurry through the feed pump into the spray nozzle, slurry spray from the nozzle to form a layer of High - speed liquid film, the liquid film and then with the formation of tiny droplets of air friction. 
The second stage: the droplets and hot air contact: hot air from the top of the hot air distributor into the tower and the droplets in contact with the same spiral or parallel down. 
The third stage: evaporation to form particles. Droplets and hot air contact after mixing, the surface of the rapid evaporation of water, the drop in the process of shrinkage into spherical particles, with the hot air together to exclude the tower, the process only ten seconds. 
The fourth stage: through the gas-solid separation device, the powder is collected, exhaust through the fan or discharged by the wet filter after the discharge.

Applications: 

● food industry: whole milk powder, ankin, cocoa milk powder, milk powder, light (yellow) and so on. Oatmeal, chicken juice, instant tea, spices, spices, various proteins and hydrolysates, corn steeps, corn starch, glucose, pectin, maltose, mountain plutonium, pumpkin powder and so on. 
● medicine: Chinese medicine extract, medicine glue, yeast, vitamins, antibiotics, amylase, lipase and other biological products. 
● plastic resin: AB, ABS latex, urea-formaldehyde resin, phenolic resin, cement (urea) formaldehyde resin, polyethylene and so on. 
● detergent: advanced detergent, ordinary detergent, soap powder, soda powder emulsifier, brightener, phosphoric acid and so on. 
● Chemical industry: sodium fluoride (potassium), alkaline dye pigments, dye intermediates, MN304, formaldehyde silicic acid, catalysts, curing agents, amino acids and so on. 
● Ceramic: Alumina, tile materials, magnesia, talc, etc.
● Other: aluminum hydroxide, calcium chloride, stearic acid and other cooling spray.

Technical Parameters:

Project / model YPL-6 YPL-12 YPL-65 YPL-100 YPL-150 YPL-200 YPL-300 YPL-400
Evaporation (kg / h) 6 12 65 100 150 200 300 400
heating method Steam + electric or fuel, gas, coal-fired hot air stove
Tower diameter (mm) φ1600 φ2200 φ2800 φ3000 φ3400 φ3600 φ4000 φ4400
Dimension (m) According to the user to provide venue layout

 

Project / model YPL-500 YPL-600 YPL-800 YPL-1000 YPL-1500 YPL-2000 YPL-2500 YPL-3000
Evaporation (kg / h) 500 600 800 1000 1500 2000 2500 3000
heating method Steam + electric or fuel, gas, coal-fired hot air stove
Tower diameter (mm) φ4800 φ5200 φ5400 φ5600 φ6000 φ6500 φ7000 φ7500
Dimension (m) According to the user to provide venue layout

1. Water evaporation and material properties, evaporation temperature, the table in the inlet temperature 180-220 ℃ calculated. 
2, the user can choose downstream, countercurrent, back to the powder and other dry way to achieve the desired product results. 
3, the process diagram only for the instructions, the user needs to buy one of the components. 
4. The tower height is configured according to the material characteristics.

Home | About us | News | Products | Cases | Equipment | Order | Contact us | 中文版
Copyright(C)2017,Changzhou Santai Spray Drying Equipment Co., Ltd.  All Rights Reserved.
Supported by Toocle Copyright Notice